Settings

 

Like its predecessor, FreeFlight 3, FreeFlight Pro offers a variety of adjustment that let you fine-tune your Parrot Disco to your preferences.

 

To access Settings, do the following:

 

1.   Go to FLY & FILM at FreeFlight Pro's main page.

 

IMG_0360.PNG

 

 2.   Tap Settings   icone_settings.png  at the piloting screen

 

IMG_0356.PNG

The first settings page (FIRST PERSON VIEW) opens.  You can select different setting parameters via the left scroll bar. To go back to the main page, press tap  icone_back.png

 

 

 In FPV, you can select whether to auto-launch the FPV goggle view when you connect your smart device to Parrot Skycontroller 2, as well as adjust the distance between the two view ports in the goggle.

 IMG_0259.PNG

 

Below FPV is Piloting.  Here you can reset the pitch of the drone, as well as its stand-by (loitering) parameters.

 

IMG_0260.PNG

 

Position lets you set the height and the distance the drone can travel, in addition to calibrating and flat trimming Parrot Disco for better flight stability.

 

IMG_0262.PNG

 

geofns.jpg

GEOFENCE is a useful feature to help prevent Parrot Disco from going too far.  When you activate GEOFENCE, Parrot Disco will turn around when it reaches the set maximum distance.

 

If GEOFENCE is turned off, a warning on the piloting screen will notify you that Parrot Disco has reached its distance limit, at which point the drone will not turn around but continue its course until you manually fly it back.

 

RTH (Return To Home) ensures that you will never lose your Parrot Disco when you lose Wi-Fi connection. In the event of a lost connection, Parrot Disco will return to its starting point if the connection is not re-established within the pre-set time period.

 

IMG_0255.PNG

 

Network is where you can adjust the quality of your Wi-Fi connection.

 

IMG_0261.PNG

 

Network Name

You can change the name of your Parrot drone by:

 

  1. Type in a new name in the field.
  2. Reboot Parrot Disco

*Note: The network name can only contain letters, numbers and underscores ("_"), and must not exceed 32 characters.

 

WPA2

*Note: by default there is no password set.

 

If you do not have a password, or if you want to set a different password, you may do so in WPA2:

 

  1. Tap the “WPA2” button.
  2. Enter the password you want to set.

IMG_0257.PNG

 

Location

Select your region/country.

 

OUTDOOR

Activate this for outside flying.

 

Wi-Fi band

Connects Parrot Disco to 2.4 or 5 GHz Wi-Fi bands.

 

  • The 2.4 GHz Wi-Fi band enables you to fly your Parrot drone from a greater distance. Generally, it is also more congested than the 5 GHz Wi-Fi band in urban areas.
  • The 5 GHz Wi-Fi band lets you have a better connection between Parrot Disco and your smartphone for video streaming. Check your smartphone user guide to see whether it can connect to the 5 GHz Wi-Fi band. Otherwise, use the 2.4 GHz Wi-Fi band instead.