Mambo Knowledge Base

Sort by:
Unboxing and Setup  
View full article
 Parrot Mambo  Parrot Flypad  Camera HD Mambo  
View full article
FreeFlight Mini in FPV mode must be enabled before placing the smartphone in the Parrot Cockpitglasses. Unfold the Parrot Cockpitglasses 2.   Launch the FreeFlight Mini app on the smartphone, connect the drone and activate FPV mode. Open the front cover of the Parrot Cockpitglasses 2. Place the smartphone in the centre point of the height and length of the Parrot Cockpitglasses 2. Close the front cover to hold the smartphone in the Parrot Cockpitglasses 2. > Make sure the front cover is securely closed and the smartphone is firmly in position.  Interpupillary distance adjustment Adjust the Parrot Cockpitglasses 2 strap before putting it on. Make sure the lenses are at your eye level by adjusting the position of the Parrot Cockpitglasses 2 on your nose. Adjust the distance between the lenses in relation to your view by sliding the cursors on the top of the Parrot Cockpitglasses 2. Precautions while wearing Parrot Cockpitglasses 2   YOU SHOULD NOT POINT THE PARROT COCKPITGLASSES 2 TOWARDS THE SUN OR ANY OTHER LIGHT SOURCES. SERIOUS EQUIPMENT DAMAGE AND/OR PERSONAL INJURY, ESPECIALLY OCULAR, MAY OCCUR IF YOU DIRECT THE PARROT COCKPITGLASSES 2 TOWARDS THE SUN OR ANY OTHER LIGHT SOURCES.
View full article
 Press the On/Off switch or insert the battery into the battery compartment. > The Parrot Mambo lights up. Place the Parrot Mambo on a flat surface with the propellers facing upwards. Wait for the LED lights to start flashing green. Press the Parrot Flypad's On/off button. > The Parrot Flypad and Parrot Mambo LED light flashes green and then turns solid green once the connection is established.    
View full article
Connect the Camera to the Parrot Mambo FPV. Launch FreeFlight Mini on the smartphone and connect the app to the drone. > On iOS: the app prompts you to enable Wi-Fi to connect the smartphone to the Parrot Mambo FPV. The name of the Wi-Fi network is: MAMBO_XXXX. > On Android, the app will be able to locate and connect to the Parrot Mambo FPV. A pop-up window may appear to confirm the connection to the camera's Wi-Fi network. Otherwise, manually connect the smartphone to the camera's Wi-Fi network. The video appears on the FreeFlight Mini app home page. > To record the Parrot Mambo FPV video, insert a micro-SD memory card into the connector on the back of the camera before installing it in the Parrot Mambo FPV. > The recorded videos are in HD 720p format.
View full article
Top Contributors