Pack FPV Knowledge Base

Sort by:
On your smartphone/tablet via FreeFlight Pro If you choose to fly without the Parrot Cockpitglasses, the display screen on your smart device will look like this:   This view combines the telemetry and radar functions into one Heads-Up-Display (HUD).     On your Parrot Cockpitglasses *Note: make sure your smartphone display is set to Standard when in FPV mode.   Press RIGHT FRONT TRIGGER button once to look through the camera of your smartphone while wearing the Parrot Cockpitglasses. Press RIGHT FRONT TRIGGER again to go back to FPV/drone-camera mode.     Press  LEFT FRONT TRIGGER on Parrot Skycontroller 2 to switch from Radar to Telemetry/HUD to Full Screen mode.       There are several display modes in Freeflight Pro application:   Radar : Information about your Parrot drone's position.     Telemetry : Distance between the pilot and the drone, altitude, speed, landing pattern, GPS strength, and both the drone and the Parrot Skycontroller battery levels.     Full Screen : Live video streaming from the front camera of the Parrot drone without any other information.  
View full article
FreeFlight Pro replaces FreeFlight 3 for Bebop Drone, Bebop 2 and Parrot Disco.   For Jumping drones, download FreeFlight Jumping. For Airborne, Hydrofoil and Rolling Spider MiniDrones, download FreeFlight Mini for iOS and Android devices.   App Permission need to be granted for location and media in order to enjoy your drone. Press here to download Bebop 2 FPV quick start guide.     Main Screen 1 - Side menu bar: Press   to get Flight Plan, to buy a drone or check for updates. 2 - My flights: See your flight history and register for Academy / Parrot Cloud. 3 - Connect to a drone: Press the "v" shaped button to connect. 4 - Remote controller: Access to Skycontroller and Skycontroller 2 settings. 5 - Fly and film: Access to the piloting interface. 6 - Buy a drone / Flight Plan: The brick changes if you get Flight Plan (in-app purchase).   Once your drone is connected:   1 - Side Bar button: Access to "Drone school", "Buy a drone", "Check for Updates", "About", and the version of FreeFlight Pro installed.     2 - Connected drone: Displays the drone's network name and information: product type, hardware version, software version, GPS version, number of flights, last flight time, total flight time, last motor error. 3 - Internal memory: Displays the available storage space and the number of new pictures taken. 4 - Wi-Fi networks: Detects your drone. 5 - Controller Settings: Access the button settings for Skycontroller and Skycontroller 2. 6 - Flight Plan: In-app Purchase*. 7 - Fly and film: Access piloting interface. * Note: You may need to connect your drone first to be able to see Flight Plan on the main screen.   MyFlights lets you see your flight history, we recommend you to register in order to have access to Academy/Parrot Cloud. Being registered permits you to retrieve and share your flight data.     Settings Settings section lets you set the controls, GPS features, the First Person View behavior and Wi-Fi settings. Make sure the settings are compliant with local laws of the selected country.   FPV (First Person View) Auto Launch: Disable or enable FPV can be activated by default. Eye Spacing: Adjusts the spacing between left-eye and right-eye views in FPV mode. Note that FPV is not available when using a tablet.   Piloting Settings Pitch Mode: Lets you choose the drone's pitch control. Normal     Inverted     Loitering Direction: Determines which direction (left or right) the drone circles overhead. Loiter Radius: Limits the drone's overhead orbiting circumference. Loiter Altitude: Limits the height at which the drone circles. Position, Distances and Limits   Flat Trim: Resets the internal sensors for level flight for your Bebop Drone, Bebop 2 and Parrot Disco; make sure you always Flat trim the drone on a flat surface. Calibrate: The Parrot Disco asks for calibration when required, you can calibrate before each flight. Max/Min altitude: Limits the height at which the drone can fly. Max Distance: Limits the drone's range. You will be notified when Parrot Disco reaches this value. Geofence: When max distance is set and Geofence is activated, Parrot Disco will return to the starting position when it reaches maximum distance. *Note: If Geofence is not activated, Parrot Disco will not return after it reaches max distance.   Return Home (RTH) Return Delay after disconnection: Limits the disconnection time before the drone initiates return home.  Network settings Network Name: Lets you change the name of your drone.  Activate WPA2 to set a password for your Parrot Disco's Wi-Fi network. Location: Select the country/region you are in. Activate OUTDOOR for flying outside. Wi-Fi band: You may choose Wi-Fi channel and band or leave the setting on automatic select. *Note: The network name of the Bebop 2 can only contain letters, numbers and underscores ("_"). It must not exceed 32 characters in length.     Record settings    To access the record setting, press the    button on the left side of the record button.   The video/photo settings page opens.   Choose between video, photo, and time-lapse mode photography, you can also adjust refresh rate, white balance (to augment ambient light in your environment), as well as exposure (via the red sliding bar).   Recording type   Video   Video recording starts automatically when you press the Take off button.  The RECORD icon   flashes during video recording.   To stop recording, press the button on Skycontroller 2.  To record a new video, press  again.   Use your finger to move the red dial at the bottom of the screen to change exposure. Or use the scroll wheel R1 on your Parrot Skycontroller 2.   *Note: You cannot shoot videos and photos simultaneously   Photo   DNG (RAW) - This mode takes a raw fish-eye photo with a 180° FOV at a 4096×3072 pixels resolution in a DNG format. DNG is compatible with professional grade editing software such as Photoshop or Lightroom.  JPEG - JPEG mode takes a screen shot of the video stream at a 1920×1080 pixels resolution. The image quality is slightly degraded because video image stabilization tends to remove sharpness and accentuate edges. In this mode, you can quickly take pictures (shutter delay is very short) that are not distorted and with a light file size.  JPEG 180 - lets you take a fish eye shot with a 180° FOV. This mode offers small editing possibilities. The default picture format is DNG, slide the red dial at the bottom of the screen to change exposure.   Taking photos On your Parrot Skycontroller 2, press the   button to take a photo. The internal memory capacity of the Parrot Disco is 32 GB, the number of stored photos is dependent upon the format selected. For best photo quality, we recommend leaving the photo setting in DNG mode.   Time-lapse Time-lapse lets you take photos at preset intervals. Use the white slider on the right to set the interval between 1 to 300 seconds. *Note: Picture format for time-lapse mode is the same as photo mode.     Map Mode The map is accessible using the satellite/map button on the lower right side of the piloting interface.
View full article
  For the optimal FPV experience, your smartphone must meet the following criteria:   Screen size: between 4.7 and 5.7 inches (119-145 mm) Maximum length: 6.30 inches/160 mm Maximum width: 3.1 inches/78.6 mm Thickness: between 0.27 and 0.40 inches (6.8-9.8 mm) The front camera should be placed opposite the USB connector.     1. Make sure you have downloaded the free FreeFlight Pro app from the App Store ® or Google Play TM  to your smartphone or tablet.   2. Pull out the phone cradle.   3. Open the cradle   4. Pass your smartphone’s USB cable through the cradle's side opening.   5. Plug one end of your smartphone’s USB cable into the Parrot Skycontroller 2, and the other end into your smartphone.   6. Turn on Parrot Skycontroller 2, and open FreeFlight Pro, wait for the controller to connect to your phone.   7. Turn on Parrot Disco, wait for the drone to connect to your phone. > By default FPV mode is activated when the drone is connected, if not, tap   in the cockpit view window to turn it on.   8. Align the center line on the FPV display (on your smartphone) with the doted line on the inside of the cradle cover. Make sure the smartphone is resting against the bottom edge of the cover before you close the cover.    9. Make sure the cradle is tightly closed before sliding it back into the goggle.  10. Adjust the strap so the goggle fits snugly on your head.  
View full article
Top Contributors