FreeFlight Pro replaces FreeFlight 3 for Bebop Drone, Bebop 2 and Parrot Disco.
For Jumping drones, download FreeFlight Jumping.
For Airborne, Hydrofoil and Rolling Spider MiniDrones, download FreeFlight Mini for iOS and Android devices.
App Permission need to be granted for location and media in order to enjoy your drone. Press here to download Bebop 2 FPV quick start guide.
1 - Side menu bar: Press to get Flight Plan, to buy a drone or check for updates.
2 - My flights: See your flight history and register for Academy / Parrot Cloud.
3 - Connect to a drone: Press the "v" shaped button to connect.
4 - Remote controller: Access to Skycontroller and Skycontroller 2 settings.
5 - Fly and film: Access to the piloting interface.
6 - Buy a drone / Flight Plan: The brick changes if you get Flight Plan (in-app purchase).
Once your drone is connected:
1 - Side Bar button: Access to "Drone school", "Buy a drone", "Check for Updates", "About", and the version of FreeFlight Pro installed.
2 - Connected drone: Displays the drone's network name and information: product type, hardware version, software version, GPS version, number of flights, last flight time, total flight time, last motor error.
3 - Internal memory: Displays the available storage space and the number of new pictures taken. 4 - Wi-Fi networks: Detects your drone.
5 - Controller Settings: Access the button settings for Skycontroller and Skycontroller 2.
6 - Flight Plan: In-app Purchase*.
7 - Fly and film: Access piloting interface.
* Note: You may need to connect your drone first to be able to see Flight Plan on the main screen.
MyFlights lets you see your flight history, we recommend you to register in order to have access to Academy/Parrot Cloud. Being registered permits you to retrieve and share your flight data.
Settings section lets you set the controls, GPS features, the First Person View behavior and Wi-Fi settings. Make sure the settings are compliant with local laws of the selected country.
FPV (First Person View)
Auto Launch: Disable or enable FPV can be activated by default.
Eye Spacing: Adjusts the spacing between left-eye and right-eye views in FPV mode.
Note that FPV is not available when using a tablet.
Pitch Mode: Lets you choose the drone's pitch control.
Loitering Direction: Determines which direction (left or right) the drone circles overhead.
Loiter Radius: Limits the drone's overhead orbiting circumference.
Loiter Altitude: Limits the height at which the drone circles.
Position, Distances and Limits
Flat Trim: Resets the internal sensors for level flight for your Bebop Drone, Bebop 2 and Parrot Disco; make sure you always Flat trim the drone on a flat surface.
Calibrate: The Parrot Disco asks for calibration when required, you can calibrate before each flight.
Max/Min altitude: Limits the height at which the drone can fly.
Max Distance: Limits the drone's range. You will be notified when Parrot Disco reaches this value.
Geofence: When max distance is set and Geofence is activated, Parrot Disco will return to the starting position when it reaches maximum distance.
*Note: If Geofence is not activated, Parrot Disco will not return after it reaches max distance.
Return Home (RTH)
Return Delay after disconnection: Limits the disconnection time before the drone initiates return home.
Network Name: Lets you change the name of your drone. Activate WPA2 to set a password for your Parrot Disco's Wi-Fi network.
Location: Select the country/region you are in. Activate OUTDOOR for flying outside.
Wi-Fi band: You may choose Wi-Fi channel and band or leave the setting on automatic select.
*Note: The network name of the Bebop 2 can only contain letters, numbers and underscores ("_"). It must not exceed 32 characters in length.
To access the record setting, press the button on the left side of the record button.
The video/photo settings page opens.
Choose between video, photo, and time-lapse mode photography, you can also adjust refresh rate, white balance (to augment ambient light in your environment), as well as exposure (via the red sliding bar).
Video recording starts automatically when you press the Take off button. The RECORD icon flashes during video recording.
To stop recording, press the button on Skycontroller 2. To record a new video, press again.
Use your finger to move the red dial at the bottom of the screen to change exposure. Or use the scroll wheel R1 on your Parrot Skycontroller 2.
*Note: You cannot shoot videos and photos simultaneously
DNG (RAW) - This mode takes a raw fish-eye photo with a 180° FOV at a 4096×3072 pixels resolution in a DNG format. DNG is compatible with professional grade editing software such as Photoshop or Lightroom.
JPEG - JPEG mode takes a screen shot of the video stream at a 1920×1080 pixels resolution. The image quality is slightly degraded because video image stabilization tends to remove sharpness and accentuate edges. In this mode, you can quickly take pictures (shutter delay is very short) that are not distorted and with a light file size.
JPEG 180 - lets you take a fish eye shot with a 180° FOV. This mode offers small editing possibilities.
The default picture format is DNG, slide the red dial at the bottom of the screen to change exposure.
On your Parrot Skycontroller 2, press the button to take a photo.
The internal memory capacity of the Parrot Disco is 32 GB, the number of stored photos is dependent upon the format selected.
For best photo quality, we recommend leaving the photo setting in DNG mode.
Time-lapse lets you take photos at preset intervals. Use the white slider on the right to set the interval between 1 to 300 seconds.
*Note: Picture format for time-lapse mode is the same as photo mode.
The map is accessible using the satellite/map button on the lower right side of the piloting interface.