Skycontroller Knowledge Base

Sort by:
1 Setup   2 Piloting   3 Record and FPV
View full article
    Network Name   Change the network name of your drone: Change the d rone   name in the Product name field. Reboot the d rone . Note: The network name of the d rone   can only contain letters, numbers and underscores ("_"). It must not exceed 32 characters in length.   WPA2   Set a password for your d rone 's Wi-Fi network.   Location   Select your country.   Wi-Fi band   Connect the d rone  to the 2.4 or 5 GHz Wi-Fi bands. The 2.4 GHz Wi-Fi band enables you to fly the d rone  from a greater distance. It is generally more congested than the 5 GHz Wi-Fi band in urban areas. The 5 GHz Wi-Fi band enables you to obtain a better quality connection between the d rone  and your smartphone for streaming footage. Check your smartphone user guide (or the technical specifications) to see whether it supports connection to the 5 GHz Wi-Fi band. If it does not, use the 2.4 GHz Wi-Fi band only.   To switch the Wi-Fi band (2.4 GHz or 5 Ghz) manually without using the application, hold down the on/off button of the d rone  for 5 seconds .   Note: The diagram at the bottom of the screen shows the state of the Wi-Fi channels.   Before flying the d rone , ensure that you comply with the Wi-Fi frequencies restrictions for the area in which you intend to fly. Certain frequencies may be restricted or forbidden. Selecting the country and activating the outdoor option enable FreeFlight Pro to adapt the available channels according to the legislation of the selected country.   For example, in certain countries using the 5 GHz Wi-Fi band may be prohibited in outdoor mode.   In automatic mode, FreeFlight Pro automatically selects a channel according to the country, the mode (outdoor/indoor), and the Wi-Fi band selected and the congestion of the channels.   If you encounter a problem with the quality level of the Wi-Fi connection: Select Manual mode. Select a non-overloaded channel using the information displayed on the diagram.
View full article
 1. Where can I find the software version of my Parrot Disco? First, connect to your Parrot Disco, then in the FreeFlight Pro application, click on the name of your device (Example: DISCO-891012)      Finally, on the next screen you will see various information about your Parrot Disco, including its software version     2. Where can I find the version of the FreeFlight Pro application? Launch the FreeFlight Pro application, then click on the context menu, you will see the version of the application     3. Where can I find the version version of my Parrot Skycontroller 2? First, connect to your Parrot Disco, then in the FreeFlight Pro (Fly & Film) application, click the settings icon  "(toothed wheel)"     Then, on the menu on the left, select Controller. Finally, you will see information about your Parrot Skycontroller 2, including its software version    
View full article
Top Contributors