Replacing propellers - Parrot Swing

Before you start, remove the MiniDrone's battery. 

 

  1. Pull on the damaged propellers to remove them. 
  2. SWING_02.PNGInstall the new propellers on their corresponding motors.

 

 

In order to properly install the propellers, follow these instructions:

 

  • Put the white propellers at the front of the MiniDrone, and the black propellers at the back of the MiniDrone.

 

  • Match the propellers with a grey dot to the motors with a grey sticker (see diagram below). 

SWING_03.PNG

  • Make sure the propellers are properly installed: when positionning them parallel to each other, the inside blade must tilt toward the MiniDrone (see diagram below). 

 

SWING_01.PNG

 

 

Warning: if your MiniDrone flips during take off, then your propellers are not properly installed.

 

 

Labels (2)